Drone Detector With 3km Fpv Signal Detect Capability For Mainstream Drones On The Market
Introduction
It is a fully integrated state-of-the-art device that combines front-end detection and countermeasure capabilities to quickly identify UAV communication links and collect real-time intelligence, displaying precise location, flight status and trajectory data, etc., on a screen on the device. The system is equipped with a “Surveillance Data Stream” function, which facilitates the user's real-time monitoring of unmanned aerial devices within the security perimeter, making quick judgments to ensure timely and effective responses to potential airborne threats.
Basic
Function |
Descriptions |
UAV detection |
Detection spectrum bandwidth: 70 MHZ - 6GHZ, detection focus on the 433Mhz,868Mhz,915Mhz,2.4Ghz,5.2Ghz,5.8Ghz FPV Detection:300Mhz-6.2Ghz Analog Signal of FPV Drones The lowest detection height: ≤0 meters |
Drones Location |
For UAVs with Remote ID (China GB42590-2023, US ASTM F3411-22a, EU ASD-STAN PrEN4709-002) and Drone ID (such as DJI Mavic2, Mavic3, air3s, Matrice4, etc., some require network decryption), it can parse detailed information such as drone location and pilot location. |
White and Blacklist |
The Systemcan identify ≧ 400 different model UAV including DJI series drones,and it has the autonomous learning ability. The Systemcan carry on the accurate identification of target, in-depth analysis of UAV signal, the identification of unique ID, and the black and whitelist to distinguish. Whitelist and a blacklist can be set for different targets of the same position, same frequency band, same manufacturer, same type of UAV respectively. |
Remote OAM |
After turning on the fully self-movable defense, it can enter unattended mode, detect, and strike autonomously. And a variety of OAM features are available when used with the remote server, including firmware updating, resetting, status inquiry, self-testing, parameter configuration, and more. |
GPS |
The Systemcan detect its current position using its built-in GPS. |
Networking |
The Systemcan network multiple devices through the cloud server, observe the online/abnormal status of each device, and control the device remotely through the mobile terminal (mobile phone IPAD), including but not limited to viewing the operating interface of the device system, receiving alarm information, viewing the black and whitelist, and turning on defense functions. |
Data security |
Use certificate management and data encryption between the equipment and server to ensure data reliability and security. |
Power Supply
The System is designed to operate at 200~240 V, 50/60Hz, 2.5A Max and 50W in detection mode, 200~240 V, 50/60Hz, 2.5A Max and 500W in Jammer mode, The SystemPower Cable is used to connect the The System stationary unit to a power supply. In addition, it can also use DC power if necessary.